Deltech-fitness DF406- 45 Degree Hyperextension Bench User Manual

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533FOR YOUR SAFETY READ ALL INSTRUCT

WARNING: THE USER OF THIS WEIGHT EQUIPMENT ASSUMES THE POSSIBILITY OF INJURY BYEXERCISING ON THIS EQUIPMENT. THE POSSIBILITY OF RISK CAN BE REDUCED BY

T-SHIRT ORDER FORMDELTECH FITNESS T - SHIRTSIZES AVAILABLE ARE M-XXL. THE COLOROF THE SHIRTS ARE WHITE. RED AND BLACKLOGO. ONLY $12.99DELTECH FITNESS

ROLLER PADTUBEQTY 1H*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533FOR YOUR SAFE

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533FOR YOUR SAFETY READ ALL INSTRUCT

TOOLS REQUIRED:ADJUSTABLE WRENCHES OR SOCKET SETASSEMBLE THE BOTTOM FRAME (A) TO THE FRONT FOOT (E) USING THE M10 x 75MM BOLTS (P),M10 WASHERS (T) AND

ASSEMBLE THE UPPER FRAME (F) TO THE BOTTOM FRAME ASSEMBLY USING THE M10 x 75MMBOLTS (P), M10 WASHERS (T) AND M10 LOCKNUT (S). INSTALL THE PULL-PINS (0

ASSEMBLE THE ADJUSTMENT ARM (B) TO THE PAD FRAME (C) USING THE M10 x 65MM BOLTS(Q), M10 WASHERS (T) AND M10 LOCKNUT (S). THEN INSTALL THE 2” CAPS (L)

ASSEMBLE THE PADS (D) TO THE PAD FRAME USING THE M8 x 25MM BOLTS (R) AND M8 WASHERS(U).PAD FRAME ASSEMBLYASSEMBLE THE HANDGRIPS (M) TO THE HANDLES.

INSTALL SQUARE CAP (L) INTO END OF TUBE FRAME (G). INSERT THE ROLLER TUBE (H) TUBE INTOTHE TUBE FRAME (G). INSTALL THE ROLLER PADS (I) ONTO THE TUBE A

INSERT THE PAD FRAME ASSEMBLY AND LEG HOLD-DOWN ASSEMBLY INTO THE UPPER FRAME.ADJUST AS NECESSARY AND TIGHTEN PULL-PIN KNOBS.FINAL ASSEMBLY